Eleaf iStick QC 200W With MELO 300 Full Kit
About Eleaf iStick QC 200W With MELO 300 Full KitThe Eleaf MELO 300 Tank pairs with the Eleaf iStick QC 200W Box Mod is a A Heaven-Made Match for Cloud Chasers . with 200W With Internal Battery and Convenient Retractable Top Fill System . with the full kit measuring only 52mm*25mm*139mm overall and weighing only 260g. The device comes with native support for Nickel, Titanium and Stainless Steel wire and can be operated in TC mode with a resistance range of 0.05-1.5ohms respectively. In addition to this great functionality, the iStick QC 200W mod also comes with a handy preheat function and 1.5A quick charging capability to ensure minimal downtime during recharge cycles. This full kit sure can give you a very special vaping experience .
Parameter for iStick QC 200W With MElO 300
The Functions of Eleaf iStick QC 200W With MELO 300 Kit
1.A Heaven-Made Match for Cloud Chasers
The iStick QC 200W is capable of outputting a maximum output power of 200W. With powerful ES coils that can handle a maximum power of 300W, the MELO 300 pairs perfectly with the iStick QC 200W to produce huge vapor clouds for cloud chasers.
2.Convenient Retractable Top Fill System
To fill the tank you just slide the drip tip back and it reveals the fill port, which is quite easy to use and works very well.
3. 200W With Internal Battery
The iStick QC 200W has three internal batteries connected in series to provide much steadier output power.
4. 1.5A Maximum Charging Current For Quick Charge
With 1.5W maximum charging current, the iStick QC 200W can be fully charged much more quickly when using the Avater quick charger(optional accessory)
5. ES Sextuple-0.17ohm Head for Ultra High Power
The ES Sextuple-0.17ohm Head consists of six coils and is rated at an ultra high power of
100-300W for huge vapor production.
6. Featuring the Cell Balancing Trickle Charge System
A cell balancing trickle charge system is adopted in the iStick QC 200W to bring the internal batteries to
the equal level charge, which also ensures high security in charging.
7. Preheat Function & Different Switchable Interfaces
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. The iStick QC 200W also has four switchable display interfaces, allowing you to choose the interface you are most accustomed to.
8. High Compatibility
With a width of 25mm, the iStick QC 200W can handle all tanks up to 25mm diameter without any overhang.
9.Dual Circuit Protection
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
10.Capable of serving as a power bank
With the Reverse Charging (“RC”) adapter (optional accessory), the iStick QC 200W will convert the 510 connection into a USB output for power bank mode, providing power to your cell phone or other e-cig device.
11. Reset Function
The iStick QC 200W can be reset in case it could not be powered on after upgraded.
Charging&Firmware Upgrading:Charging: simply plug the iStick QC 200W in to a computer or a wall adapter to charge.
Firmware upgrading: the firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
1.Please frist drip a few drops of e-liquid directly into the coils to make them fully saturated before fist use.
2.Before replacing atomizer head, please be sure that there is no e-liquid left in the atomizer.
3. Please refill the tank timely when there is only a small amount of e-liquid left.